• Model NO.：DL811
• Wavelength：810nm
• Mode：Single Pulse and Continuous Pulse
• Frequency：1~10Hz
• Pulse Width：10-200 Ms
• Spot Size：10X12 mm²
• Energy Density：0-150j,Cm2
• Electrical Requirement：AC 220V±10% 50Hz; AC 110V±10% 60Hz
• Cooling System：Water Cooling + Wind Cooling + Semiconductor
• Transport Package：Aluminum Case
• Specification：65cmx258cmx46cm
• Trademark：BEIR
• Origin：Gz, China
• HS Code：901890900
• Production Capacity：800 Sets,Month

FuseMax 10 AFrequency1-10 HzSpot size10*12 m²Temperature0-40 ºCInput power1200WEnergy Density0-150 J/CM²wave length810nmGorss weight30kgs

Cautions after treatment:
1: After finished treatment, the treatment area will feel slightly scorching hot and skin around hair follicles appears erythema, which is normal phenomenon, do ice compress to partial skin for 10-15 minutes if needed;
2: the residual hair on treatment area can pull out in 24 hours or automatically fall off in several days;
3: The current day of treatment, use low temperature water to wash and use liquid skin care products;
4: After treatment, pay attention to protecting moisture and sunscreen;
Cautions before and after therapy:
1: One month before treatment, pay attention to the sunscreen;
2: Two weeks before treatment, the treatment area does not remove hair with plucking out, with cream or electrolysis ;
3: Two days before and after treatment, to avoid chemical or mechanical stimulation;
4: Two weeks before and after treatment, to disable the filling or other injection, etc the kind of interventional therapy;
 
Therapy periods:
Underarm, Face: One Therapy interval---4-6 weeks;
Arms and legs, body: One Therapy Interval----4-6 weeks;
Treatment Period: 3-5 times;
 
Contraindications:
The following symptoms are forbidden to use:
The pregnant
Recently (within 1-3 months) accepted the sun exposure or sun bath
The patient with open wound
The patient with infected wounds
The patient suffering from skin disease
The patient with epilepsy





 
Attentions:
1: First check the host, accessories, power supply wire is broken or not before use;
2: connect correct voltage (220V to 220V, 110V to 110V), can not get through wrong voltage.
3 Start system, in addition to television, refrigerator, Do not turn on electrical power device at the same time;
4 Before therapy, please take hearing aid, electronic wristwatch, magnetic card, mobile phone or other things off first, pay attention to child's care to avoid touching;
5 During the therapy, drink more water based on your physical;
6 In case of happening special circumstances or accident, please immediately stop using and consult professionals;
7 Patients with above mentioned medical electrical device can not use this system at the same time;
8 Above mentioned patients should be agreed by professionals before using this device;
9 Please immediately turn on power supply, stop using if following abnormal situation happened:
9A water or other things into host;
9B: The sound of system to be unusual;
9C Abnormal smell or smoke;
9D: Any accessories broken;
9E: Natural disaster, earthquake, and the sudden thunder;
10: When the treatment is finished, please cut off the power supply, be sure to unplug the power plug from the power socket;
11: Transportation and storage conditions: the transport process should be to prevent sun and rain, packaged equipment should be stored in relative humidity of not more than 80%, no corrosive gas and ventilated room;


Parameter
Laser Type: High Quality 810nm Semiconductor laser beam soure
Wave Length: 810nm
Output: 810nm Treatment of handle out direct output mode (hand gun type)
Mode: Single Pulse and  Continuous pulse
Frequency: 1~10Hz
Pulse Width: 10-200 ms
Spot Size: 10x12 mm²
Energy Density: 0-150J/cm2
Electrical Requirement: AC 220V±10% 50Hz;  AC 110V±10% 60Hz
Cooling System: water cooling + wind cooling + Semiconductor
Temperature: 0-40ºC
Input Power: 1200W
Fuse :Max10A
Gross weight: 30KGS
Machine size: 45cmx49cm*35cm
pacakge size:65cmx258cmx46cm

Our Company




Contact us
Thank you for your visiting , if you want to know more, please feel free to contact  me or send me enquiry , I am waiting for you. :)
Contact person: Livia Mo