• Model NO.：NYC-3
• Handlepieces：Two Handles Sr,Hr,Vr
• Waranty：3 Years
• Model：Smq-Nyc-3
• Transport Package：Aluminum Alloy Case,Carton Case,Wooden Case, Accor
• Specification：46x60x105cm
• Trademark：Monaliza
• Origin：Beijing
• HS Code：8543709990
• Production Capacity：50000pieces,Year

Basic Info.

Model NO. NYC-3 Handlepieces Two Handles Sr,Hr/Vr Waranty 3 Years Model Smq-Nyc-3 Transport Package Aluminum Alloy Case/Carton Case/Wooden Case, Accor Specification 46x60x105cm Trademark Monaliza Origin Beijing HS Code 8543709990 Production Capacity 50000pieces/Year

Product Description

New professiona IPL laser beauty machine hair removal & freckles remove machine

Product description :
Precipulse IPL Therapy System holds a wavelength from 420nm to 1200nm. Different wavelength is adopted in treatment based on clinical requirements. This system is focus on treating various kinds of clinical indications including pigmented lesions and vascular diseases as well as hair removal and skin rejuvenation. It contains a wide clinical application range.
Treatment Principle:
Precipulse™IPL Therapy System follows selective photothermolysis principle. Certain wavelength that can be used in and absorbed by targeted tissues. Targeted tissues will be destroyed according to targeted chromophore's selective absorption to light. What's more, the pulse width shall be smaller than or equal to targeted tissues' thermal relaxation time, then its damage to surrounding tissues will be minimized because of insufficient time for heat delivery.

Applications:

Hair removal competely and permanently

Skin rejuvenation

Ance removal

Freckle removal

Vascular removal

Removal of pigmentations, age spots, sun spots, etc.

 

Advantages:

1. PreciPulse, accurate energy output(deviation<5%)

2. 3 treatment heads:HR ;SR;VR(Optional)

3. 3 treatment modes, tradtional IPL,FP(FIY POINTS) mode, mode for different disease.

4. 3000W IPL power supply system, discharge frequency 1HZ

5. Mini and delicate treatment hand piece, easy to operation

6. TDK-Lambda switching power supply system

USB reserved connector future upgrating

Product specification:

	General Features
Equipment Model	SMQ-NYC-3
Manufacturer	Beijing Sincoheren Science and Technology Development Co., Ltd.
Operational Mode	Continuous operation
Wavelength	Wave length of SR treatment Handpiece: 560nm - 1200nm Wave length of HR treatment Handpiece: 690nm - 1200nm
Maximum Fluence	HR treatment Handpiece: 45J/cm2±20% SR treatment Handpiece: 40J/cm2±20%
Spot Size	Size of HR Aperture: 16mmx57mm, error range: ±0.1 mm Size of SR Aperture: 8mmx34mm, error range: ±0.1 mm
Dimensions	525mmx490mmx 1080mm ( L x W x H )
Net weight	45kg

How is IPL used to treat benign vascular lesions?
Aging, sun exposure and other factors can cause the appearance of broken capillaries and blood vessels on the face known as telangiectasias, which appear as spider veins. Sometimes broken capillaries can cause a diffused redness in the skin, called erythema, a source of social embarrassment for many people. Rosacea is a common skin condition that is characterized by diffused erythema. All of these conditions respond well to IPL. 
For unsightly veins on the legs, both IPL and Nd:YAG laser technologies together are capable of addressing these lesions. During treatment, Intense Pulsed Light or laser light is absorbed by the blood in these small veins, heating and destroying the vessels. Over time the destroyed veins are reabsorbed and disappear.

What are IPL Skin Treatments using Photo rejuvenation? 
The term "Photorejuvenation" refers to the non-ablative, non-invasive treatment of red and brown pigment that leaves a smooth skin texture and even complexion, yielding a more youthful appearance.
IPL Skin Treatments are a safe, effective and popular way to improve the signs of aging from the face, neck, chest, arms and hands. This in-office procedure is performed by a physician or trained medical staff member and typically requires four to six sessions of about 20 minutes each, performed at approximately three-week intervals. 

How many treatments will I need ?
On average a patient will require 6~8 treatments to achieve the effective result. This is because target tissue such as capillaries and melanin are at different depths whilst hair grows in cycles. To be treated hair must be in its active phase rather than dormant. Different parts of the body grow hair at different rates. It is essential that patients return at the recommended times to achieve the optimal result. Occasionally some people will need more treatments. These include those with hormonal imbalances, such as polycystic ovarian syndrome, and require those with darker skin where lower energy levels must be used to protect the skin. Some patients will a maintenance treatment a few times a year. Essentially, once target tissue is treated it is gone forever. Any re-occurrence is new hair or blood vessels that were not present at the time of treatment. Blood vessels and pigmentation located in the deeper dermis cannot be treated as the risk of damaging the dermis outweighs the benefit of trying. For this reason some patients may find that unwanted blood vessels and pigmentation problems are improved but not completely resolved. Men wanting hair removal are special cases where a reduction in hair is possible but complete resolution impossible, due to their high testosterone levels stimulating hair growth.

 

Company profile:
Established in 1999, Beijing Sincoheren S&T Development co., Ltd. is one of the largest and the earliest professional hi-tech manufacturers of medical and aesthetic equipment, most of our device got the TUV CE, TGA certificates. We supply Intensive Pulse Light (IPL) Laser machine, CO2 Laser machine, 808nm Diode Laser machine, Q-Switched ND: YAG Laser machine, cyrolipolysis machine, HIFU, body slimming RF machine etc. We specialize in manufacturing skinhair removalbody slimming treatment equipments. Kuma, Coolplas and Monaliza are our well-known brands. We have our own Research & Development Department, Factory, International Sales
Department, Overseas Distributors and After Sales Department. Our devices are various from IPL series, Laser series, RF series to KUMA Body Shape series, Ultrasonic Cavitation, Elite and LED-PDT, etc. We also provide OEM and ODM services based on Clients' desires.
FAQ:
Q: how long is the delivery time
A: We often delivery by DHL 3-7 days

Q: how can I use this machine?
A:You will get instruction of both user manual and video together with this device. You should have no problem using it like our other clients.

Q: if have problem in future how l can fix?
A: , At first our machine have a good quality, most of parts imported from USA and Germany, normal have no problems, also our machine all Modular design, if have problems, it's easy for our engineer to fix it online, and we also supply 24 hours consult about any problems online.

Q: Why choose sincoheren
A: our company have more than 23 years history in this industry, and we are the top 10 manufacturer in China,  All of our cosmetic lasers are up to world class standards with both FDA and Medical CE TUV certifications. Also the best service , our own digital APP sincoheren to help customers do free training  

As a professional manufacturer, we provide follow services:
1.Two years warranty and life time maintenance.
2. We have completeaier sales sevice deparment provde 24 hous senice. we aso have professional engineers services and brach office in USA, Austraia, Germany, quick effective service
3. In time delivery.
4. High Quality assurance.
Welcome your any inquiries
Please contact Miss Jade